Oil Paint Bright White 7.5L

Flat Semi-Gloss Finish,  Eggshell Finish 

VERY IMPORTANT: ENSURE YOU STIRE THE PAINT VERY WELL BEFORE USE AS THE COLOUR WILL CHANGE TO THE ORIGINAL COLOUR!!!!!!

Definition:  Solvent-based, alkyd binder-based, lead-free, bright, enamel, decorative synthetic topcoat paint.

Applicable Surfaces:  Can be applicable on all wooden, metal and concrete surfaces indoor and outdoor areas, doors, windows and furniture after convenient priming.

Surface Preparation:  The applied surfaces should be strong enough to carry themselves. All loose layers, swollen paint residues, dust, grease, rust, and dirt on surfaces should be cleaned and removed. Imperfections and differences on the surface should be corrected with Permolit Permomacun Synthetic Paint Putty. The paste-applied areas should be ground and all dust removed. Prime with Permomast Synthetic Primer.

Painting wooden surfaces for the first time:  Clean wood resins on wooden surfaces using oakum wetted with cellulosic thinner. Saturate surfaces with Permolit Permovernik Wood Varnish. Correct the surface with Permomacun Synthetic Paint Putty and prime with Permomast Synthetic Primer.

Painting metal surfaces for the first time:  Before the first coat of paint, the oil, rust and all kinds of dirt on the metal surfaces should be cleaned. Prime corrosive surfaces with Anti-Rust Metal Primer.

Painting plaster or concrete surfaces for the first time:  Before the first coat of paint, plastered surfaces should be controlled and loose layers removed. Correct the surface with Synthetic Paint Putty. Grind and remove all dust. Prime with Permomast Synthetic Primer.

Previously Painted Surfaces:  Previously painted surfaces should be ground and all dust removed. Correct surface imperfections with Permomacun Synthetic Paint Putty. Grind and remove all dust. If Permomacun is applied, prime whole the surface with Permomast Synthetic Primer.
Dilution: The product should be thinned 5-10% for brush and roller applications and 15-20% for pistole applications with Permolit synthetic thinner.

Application:  Apply on the surface prepared for the topcoat at least two coats using a brush, roller, or pistol. Wait 24 hours between coats. All tools used can be cleaned with synthetic thinner after the application.